Level 69 - Cyan Monolith, Shape Keypad, and Nano-fabricator Printer
Level 69
Video Walkthrough
Objective
Open the cyan-veined grey monolith on the cracked glowing ground by clearing its symbol box, dial lock, path plaques, color-node board, shape keypad, gravity maze, and base shard slots, then claim the Nano-fabricator Printer from the opened chamber.
Step-by-Step Solution
- Start at the tall grey monolith with a flame-shaped cyan-veined wing, standing on cracked ground that glows gold under a starfield—note the circular mid frame, base shard sockets, and any scroll resting on a ledge
- Pick up the scroll or Paper Clue and the early blue-tipped cylinder tool, then inspect the circular base socket that already holds teal shard pieces
- Read the three glowing cyan symbols etched on the pillar (sun burst, double chevron, and clustered circles), then open the Box keypad and press the matching three buttons in that order
- On the four-dial face, rotate each ring so the glowing cyan crystal marks and inner blue wedges line up with the clue strip or center pathways, then seat the wooden peg or four-dot strip into the empty middle socket
- Study the dual leaf-shaped gold path plaques—trace each circuit from the left eye/leaf start to the right end icon, and use that route if a later slider or handle asks for the same turns
- Open the hexagonal winged board and slide the red, green, blue, and yellow symbol tokens along the tracks into the central six-slot hub until every colored node locks
- Collect the triangular cyan shards and any curved wing fragment that unlock after the node board, then keep the Paper Clue ready for the next panel
- At the 3x3 shape keypad, use the Paper Clue to place square, triangle, and circle icons into the grid in the correct pattern—tap the three cyan shape buttons below, and use the red X only if you need a clean reset
- Solve the gravity rotation maze: use the clockwise and counter-clockwise buttons to tip the shield board so the white token slides around the dark blocks and lands on the center goal mark
- Return to the monolith base, insert the remaining shards into the empty shield-shaped sockets, and fit the curved wing piece if a gap remains on the cyan-veined arm
- At the center dial, use the up and down triangle controls (or the matching blue triangle markers) until the circular hatch opens
- Take the Nano-fabricator Printer—a silver-and-black rectangular device with a glowing blue core—from the opened chamber, then finish on the Level Won screen for your coin reward
💡 Tips & Tricks
- Copy the pillar symbols onto the Box exactly—sun, double chevron, then the clustered circles—before trying random button presses
- On the four dials, watch both the outer cyan crystals and the inner blue wedges; both usually need to face the center pathways
- Treat the dual gold plaques as a shared map—top and bottom paths look alike, so one clear tracing covers both
- On the color-node board, clear outer branches into the center hub one color at a time so tracks do not jam
- On the gravity maze, take short rotations—long spins slam the white token into dead corners
- If the final hatch stays shut, confirm every base shard socket and the center triangle dial are finished
⚠️ Common Mistakes
- Pressing Box buttons in the wrong order after misreading the pillar etchings
- Aligning only the outer dial marks and leaving the inner blue wedges wrong
- Leaving one colored token on an outer branch of the hex board
- Filling the shape keypad by guesswork without opening the Paper Clue
- Over-rotating the gravity maze and trapping the white token behind a dark block
- Forgetting a second or third base shard after collecting only the first teal piece
- Missing the Nano-fabricator Printer because the Level Won banner appears as soon as the hatch opens
Additional Notes
Level 69 centers on a grey monolith with a cyan-veined flame wing, set on cracked gold-glowing ground under a starfield. You match pillar symbols on a Box keypad, clear a four-dial lock and dual gold path plaques, sort a colored-node hex board, enter a Paper Clue shape code, finish a gravity rotation maze, seat the remaining base shards, then collect the Nano-fabricator Printer.
What You'll Learn
- Pillar-to-Box Symbol Codes: Reading cyan etchings and pressing matching keypad icons
- Four-Dial Crystal Locks: Rotating rings so cyan marks and blue wedges meet at the center
- Dual Path Plaques: Tracing mirrored gold leaf circuits as movement maps
- Winged Color-Node Boards: Sliding red, green, blue, and yellow tokens into a central hub
- Paper Clue Shape Keypads: Building a 3x3 pattern from square, triangle, and circle buttons
- Gravity Rotation Mazes: Tilting a blocked grid so a white token falls to the goal
- Base Shard Assembly: Seating teal fragments and wing pieces to open the mid hatch
Core Mechanics Introduced
- Symbol Transfer: Pillar etchings unlock the handheld Box before the dial face opens
- Clue Strip and Center Peg: A four-dot strip or wooden peg finishes the four-dial lock
- Paper Clue Shape Grid: The scroll encodes the exact square-triangle-circle layout for the keypad
Difficulty
Hard — Several distinct panel types feed one monolith hub, with a long node board and gravity maze near the end. Most players can finish in 7–11 minutes.
Estimated Completion Time
7–11 minutes for first-time players, 5–8 minutes once you know the pillar-to-Box code and Paper Clue keypad pattern.