Level 46 - Block Puzzle, Maze Puzzle, Picture Puzzle, and Five Lights
Level 46
Video Walkthrough
Objective
Unlock the vault by solving the block puzzle for screwdriver, collecting magnet and battery, securing screw to reveal a number, entering the number on the keypad for emblem, using emblem and USB to get ball, solving the maze for token, solving the picture puzzle for the five-lights clue, then setting the five lights to match the clue to open the safe.
Step-by-Step Solution
- Turn to the right side of the safe
- View the large panel to see the first puzzle
- Examine the Block Puzzle - on the board there is a large block on the left and many small lines on the grid
- On the right side of the grid is a hole that the large block must reach
- Slide the lines around the grid to create space
- Move the lines so the large block can pass across the board to the hole
- Once the block reaches the hole, collect the Screwdriver
- Turn to the left side of the safe
- Locate the round hatch on the right of the left side
- Turn the handle to open the round hatch
- Collect the Magnet from inside the hatch
- Look at the small strip on the same side, just above the hatch
- Remove the cover from the strip
- Collect the Battery
- Look at the front of the safe and examine the lower right corner
- Use the Magnet on the lower right corner to collect a Screw
- View the small hole at the right center of the front of the safe
- Place the Screw into the small hole
- Use the Screwdriver to fix the screw in place
- The front section will turn after the screw is fixed
- Tap the blue circle at the top to view a number
- Note the number that appears
- Turn to the back of the safe
- View the keypad at the top of the back
- Enter the number you saw (e.g. 5795) on the keypad
- After entering the correct number, collect the Emblem
- Turn to the right side of the safe again
- View the triangle slot
- Add the Emblem to the triangle slot
- Collect the USB that becomes available
- Look on top of the safe
- Find the small socket to the left of the blue dome
- Add the USB to the socket
- The blue dome will lift
- Collect the Ball from under the dome
- Turn to the back of the safe again
- Place the Ball into the maze on the back
- Examine the Maze Puzzle - rotate the maze; the ball will fall under gravity
- Tilt or rotate the maze to guide the ball
- Get the ball to reach the exit at the bottom center of the maze
- Once the ball reaches the exit, collect the Token
- Turn to the left side of the safe again
- Locate the black screen on the left
- Add the Battery to the top of the black screen to turn it on
- A jumbled image will appear on the screen
- Examine the Picture Puzzle - tap pairs of image parts to swap their positions
- Continue swapping pairs until you reassemble the full image
- Once the image is correctly assembled, a clue will appear
- Note the clue: five colored lines with symbols
- Turn to the front of the safe again
- View the bottom left corner
- Add the Token to the circle slot at the bottom left
- Five blue lights with symbols will appear at the bottom of the front
- View the Five Lights puzzle
- Set each of the five lights to the color and symbol that match the colored lines clue from the picture puzzle
- Tap each light to cycle through and change its color or symbol
- Match all five lights to the clue
- Once all five lights match the clue, the safe will open
- Collect the Archaeological Toolkit artifact to complete Level 46
💡 Tips & Tricks
- Solve the Block Puzzle first to get the Screwdriver - you will need it later
- Slide grid lines to open a path; the large block moves toward the hole when there is space
- Open the round hatch on the left by turning the handle, then take Magnet and Battery (remove strip cover above hatch)
- Use the Magnet on the front lower right corner to get the Screw
- Place the screw in the hole at right center of front and use screwdriver to fix it
- After fixing the screw, tap the blue circle at the top to see the keypad number
- Enter the number on the back keypad (e.g. 5795) to get the Emblem
- Place the Emblem in the triangle slot on the right to get the USB
- Insert the USB in the socket on top (left of blue dome) to lift the dome and get the Ball
- In the Maze Puzzle, rotate the maze so the ball rolls to the bottom center exit
- Put the Battery in the black screen on the left to turn on the Picture Puzzle
- In the Picture Puzzle, tap two parts to swap them; keep swapping until the image is correct
- Remember the five colored lines and symbols from the picture puzzle clue
- Place the Token in the circle slot at the front bottom left to activate the Five Lights
- Tap each of the five lights to set its color/symbol to match the clue
⚠️ Common Mistakes
- Not sliding the grid lines enough in the Block Puzzle so the block cannot reach the hole
- Forgetting to open the round hatch or remove the strip cover to get Magnet and Battery
- Not using the Magnet on the front lower right to get the Screw
- Not placing the screw in the hole or not using the screwdriver to fix it
- Forgetting to tap the blue circle after the front turns to see the number
- Entering the wrong number on the back keypad
- Not placing the Emblem in the triangle slot to get the USB
- Not inserting the USB in the top socket (left of blue dome)
- Not guiding the ball to the bottom center exit in the maze
- Not adding the Battery to the black screen to activate the Picture Puzzle
- Not reassembling the image correctly in the Picture Puzzle
- Forgetting the five-lights clue (colors/symbols) from the picture puzzle
- Not placing the Token in the circle slot at the front bottom left
- Not setting all five lights to match the clue
- Setting the wrong color or symbol on one or more lights
Additional Notes
Level 46 combines a block-sliding puzzle, maze navigation, image reassembly, and a five-lights matching puzzle, with item collection and code entry in between.
What You'll Learn
- Block Puzzle: Sliding grid lines to create a path for a large block to reach a hole
- Magnet and Tool Use: Using a magnet to retrieve a screw and a screwdriver to fix it
- Number Reveal and Keypad: Tapping a blue circle to see a number, then entering it on a keypad
- Emblem and USB: Placing an emblem in a triangle slot to obtain a USB, then using the USB to lift a dome
- Maze Puzzle: Rotating a maze so a ball rolls by gravity to the exit
- Picture Puzzle: Swapping pairs of image parts to reassemble a jumbled image and reveal a clue
- Five Lights: Matching five lights to a clue of colored lines with symbols
Core Mechanics Introduced
- Line Sliding: Moving small lines on a grid to make room for a block
- Round Hatch and Handle: Turning a handle to open a hatch and collect items
- Magnet for Screw: Using a magnet on a specific spot to collect a screw
- Screw and Screwdriver: Placing a screw in a hole and fixing it with a screwdriver to trigger the front to turn
- Keypad Entry: Entering a four-digit number (e.g. 5795) on the back keypad
- Triangle Slot: Placing the emblem in a triangle slot to receive the USB
- USB and Dome: Inserting USB in a socket to lift the dome and get the ball
- Gravity Maze: Rotating the maze so the ball falls to the bottom center exit
- Battery-Powered Screen: Adding a battery to turn on the picture puzzle
- Pair Swap: Tapping two image parts to swap them until the image is correct
- Token in Circle Slot: Placing the token to reveal the five lights
- Light Tapping: Tapping each light to change its color/symbol to match the clue
Difficulty
Medium to Hard - Multiple puzzles and item uses in sequence; the picture puzzle and five-lights matching require attention to the clue. Most players can complete it in 12–16 minutes.
Estimated Completion Time
12–16 minutes for first-time players, 7–10 minutes once you know the order and solutions.