Level 47 - Horn Puzzle, Angles Puzzle, Circuit Diagram, and Cranks Puzzle

Level 47

Video Walkthrough

Objective

Unlock the vault by turning the front yellow panel for a clue, solving the horn ring puzzle to get the valve, placing the valve and solving the angles puzzle for the first crank, removing screws and bars for a symbol clue, collecting the coin and entering the symbol code for the second crank, completing the circuit diagram for the third crank, and matching the three cranks to the front clue to open the safe.

Step-by-Step Solution

  1. Tap the center of the front of the safe
  2. The large yellow panel will turn to reveal the inside
  3. Note the clue with lines shown inside the panel
  4. Look on top of the safe and find the horn
  5. Look into the horn to find a puzzle
  6. Examine the Horn Puzzle - there are 6 rings held together
  7. Each ring has splits in it; tap a ring to rotate it
  8. Rotate the rings to remove them one at a time
  9. Start by turning the red or white rings first
  10. Release the lower corner rings, then the bottom center ring
  11. When the panel opens, collect the Valve
  12. Note the small diagram on the top left of the horn area - this is a clue
  13. Look at the lower left of the front of the safe
  14. Note another part of a diagram there
  15. Turn to the back of the safe
  16. Place the Valve into the hexagon slot at the top of the back
  17. Turn the valve
  18. Four dials will turn slowly and reveal an angle number one at a time
  19. Note the four angle numbers in the order they appear
  20. Use the dial on the right and turn it to point to each of the four numbers one after the other in the same order
  21. Once the angles puzzle is correct, a drawer opens on the right side of the safe
  22. Collect the first Crank (1 of 3) from the drawer
  23. Look at the panel above the drawer
  24. There are bars held in place with screws
  25. Tap the screws to remove them
  26. Remove all of the bars - some must be removed in a certain order because they cover others
  27. When all bars are removed, you will see 5 red symbols; note this clue
  28. Note the other part of a diagram on the upper right of this panel
  29. Turn to the back of the safe again
  30. Look on the lower left of the back
  31. Collect a Coin from the slot
  32. Note another part of a diagram below the coin slot
  33. Turn to the left side of the safe
  34. View the panel at the bottom of the left side
  35. There are five symbol settings that you can change
  36. Enter the code using the 5 red symbols clue you found (the order from the bars panel)
  37. Once the code is correct, collect the second Crank (2 of 3)
  38. Note the diagram part immediately above this panel
  39. Look at the screen at the top of the left side
  40. Place the Coin into the slot on the right of the screen to turn it on
  41. Examine the Circuit Diagram that appears
  42. Five components are shown at the bottom of the screen
  43. Drag and place each component onto the lines of the diagram
  44. Use the diagram parts you have seen (top left of horn, lower left front, upper right of bars panel, below coin slot, above symbol panel) to place the five components correctly
  45. Once the circuit diagram is correct, collect the third Crank (3 of 3) from the back of the safe
  46. Return to the left side of the safe
  47. Place all three Cranks into their slots
  48. Examine the Cranks Puzzle - tap each crank to turn it to different positions
  49. Match the position of each crank to the clue seen on the front of the safe (the line clue from the yellow panel)
  50. Set all three cranks to match the clue
  51. When all cranks match, the safe will open
  52. Collect the Music Instrument artifact to complete Level 47

💡 Tips & Tricks

  • Tap the center of the front first to turn the yellow panel and get the line clue - you need it for the cranks at the end
  • In the Horn Puzzle, start with red or white rings, then free the lower corners and bottom center
  • Rings have splits - tap to rotate; remove them one at a time
  • Remember the small diagram on the top left of the horn; it's part of the circuit clue
  • After placing the valve, note the four angle numbers in order before using the right-hand dial
  • Set the right dial to each of the four numbers in the same order they appeared
  • When removing bars, some screws and bars block others - remove in the order that allows access
  • The 5 red symbols are the code for the symbol panel on the left bottom
  • Collect the coin from the back lower left before the circuit puzzle
  • Enter the five-symbol code on the left bottom panel to get the second crank
  • Put the coin in the slot on the right of the top-left screen to turn on the circuit diagram
  • Use all the diagram parts you've seen around the safe to place the five components on the circuit
  • Place all three cranks on the left, then tap each to match the front line clue

⚠️ Common Mistakes

  • Not tapping the center front to get the yellow panel line clue first
  • Removing the horn rings in the wrong order - start with red/white then lower corners and bottom center
  • Not noting the four angle numbers in order in the Angles Puzzle
  • Setting the right dial to the wrong order or wrong numbers
  • Removing bars in the wrong order so some screws or bars stay blocked
  • Forgetting the 5 red symbols clue for the left-side symbol panel
  • Not collecting the coin from the back lower left
  • Entering the wrong symbol code on the left bottom panel
  • Not placing the coin in the screen slot to turn on the circuit diagram
  • Placing the five components incorrectly on the circuit - use every diagram clue
  • Not matching each crank position to the front line clue
  • Placing cranks but not adjusting them to match the clue

Additional Notes

Level 47 uses a line clue from the front panel, a horn ring puzzle, an angles puzzle with a valve and dial, bar removal for a symbol clue, a coin and symbol-code panel, a circuit diagram puzzle, and a three-cranks position puzzle to open the safe.

What You'll Learn

  • Horn Puzzle: Rotating split rings in the correct order to remove them and get the valve
  • Angles Puzzle: Turning the valve to reveal four angle numbers, then setting a dial to those numbers in order
  • Diagram Clues: Collecting diagram parts from multiple sides (horn, front, right panel, back, left) for the circuit
  • Symbol Code: Entering the five red symbols on the left-side panel to get the second crank
  • Circuit Diagram: Placing five components on the circuit lines according to the diagram clues
  • Cranks Puzzle: Placing three cranks and matching each crank’s position to the front line clue

Core Mechanics Introduced

  • Yellow Panel: Tapping the center front to turn the panel and reveal a line clue
  • Split Rings: Tapping rings to rotate them and remove them in sequence
  • Valve in Hexagon Slot: Placing the valve on the back and turning it to reveal angle numbers
  • Right Dials: Setting the right-hand dial to four numbers in the order they appeared
  • Screws and Bars: Tapping screws to remove bars; order matters when bars cover each other
  • Coin and Symbol Panel: Using the coin from the back in the left-side screen; entering the 5-symbol code on the bottom panel
  • Circuit Components: Dragging five components onto the circuit lines to match the diagram clues
  • Three Cranks: Placing cranks and tapping each to match the front line clue

Difficulty

Medium to Hard – Several linked puzzles and many clues (lines, diagrams, symbols, angles). Most players can complete it in 12–16 minutes.

Estimated Completion Time

12–16 minutes for first-time players, 7–10 minutes once you know the order and solutions.

Previous Level
All Levels
Next Level